MFT-R4000 high speed reciprocating friction wear tester

MFT-R4000 is a multifunction tester used for evaluating the high speed reciprocating friction and wear performance of materials and films under different environment with variation of load, frequency, temperature and gas. It is also applied in the friction and wear measurement under corrosive solution, mainly simulating the conditions of sea, river, lake, and body fluid, etc.. 

（Constant Loading Curve）                       （Sinusoidal loading curve）

               （Triangular loading curve）                         （Gradient loading curve）

  （Electrochemical corrosion curve）               （Electrochemical corrosion curve）

（Three-dimensional topography）

（Analysis curve）

Key technical parameters:

1. Instrument weight：42.5kg

2. Appearance size:400×250×360(mm×mm×mm)

3. Loading way:
   Weight loading
   Automatic loading: constant loading、Alternating loading (sine wave loading, triangle wave loading, gradient loading)

4. Loading range:

Weight loading:500~2000g

Automatic loading:0~300N  the accuracy is 0.25N

5. Friction measurement range:0~100N, the accuracy is 0.25N

6. Reciprocating frequency: 0.05~20Hz

7. Reciprocating times: not limited

8. Lift height: 20mm

9. Reciprocating distance: 2.5 ~ 40mm

10. Sample size:10-35mm，The thickness is 2～15mm

11. Mating materials diameter: Φ3 mm, Φ4 mm, Φ5 mm, Φ6 mm

12. Friction pair materials: GCr15 steel ball, AlO ceramic ball, ZrO ceramic ball, SiN ceramic ball

13. Test operation: keyboard operation, microcomputer control

14. Data processing: the Access, Excel database file, Word experiment report and Jpeg picture can be generated

15. Power：2kw

16. Operating Voltage：220V

Optional:
1.Load range：

Medium range: Weight loading:100~1000g

Automatic loading:0~30N  the accuracy is 0.025N

Small range: Weight loading:10~100g

2.Friction force range：

Medium range:0~10N  the accuracy is 0.025N

Small range: 0~1N  the accuracy is 0.0025N

3.Heating components: room temperature to 300℃, Multi-stage program setting

4.Vacuum measurement accessories:-0.08MPa～the atmospher

5.Current-carrying friction components

(1) Testing friction current:50A

(2) Dynamic in-situ and synchronous real-time friction coefficient measurement

(3) Dynamic in-situ, synchronous, real-time friction current test

(4) Dynamic in-situ, synchronous, real-time friction coefficient, and friction current display

6.Oil / grease lubrication components

7.Wear measurement components
      (1) Moving range：2～10mm

(2)Measurement range: 1 ~ 200μm
     (3) Accuracy: 0.1μm
     (4) Indenter: diamond with 90°cone angle, the tip radius is 0.1mm

8.Electrochemical workstation test components:

Hardware specifications:
     Constant potential control range of friction corrosion: ± 10V

Constant current control range of friction corrosion: ± 200mA

Control accuracy of friction corrosion potential: 0.1% × Full scale reading ± 1mV

Control accuracy of friction corrosion current: 0.1% × Full scale reading

Friction corrosion potential resolution: 10uV (>100Hz), 3uV (<10Hz)

Friction corrosion current sensitivity: 1pA

Friction corrosion current range: 2nA~200mA, 9gears in total

Friction corrosion tank pressure: ± 13V

Maximum output current of friction corrosion: 200mA

Frequency response of friction corrosion impedance: 10uHz~1MHz

Functions of electrochemical corrosion software:

Open circuit potential test (OCP), potentiostatic polarization, constant current polarization, linear cyclic voltammetry (CV), linear scanning voltammetry (LSV), square wave voltammetry (SWV), polarization curve test (Tafel), battery charge discharge test (GCD), impedance test potential/current control mode, constant frequency impedance test potential/current control mode, Motschottky curve test;

The software supports the serialization test function, and can realize automatic measurement under unattended condition through user-defined method combination;